Sum total:   NOK 0,00
Go to cart

Itus

ITUS – Optimised to the core

The ITUS is a completely versatile and lightweight reversible harness with a seat board, airbag and SAS-TEC protector. If required, the rucksack can be completely detached. Always on board: an extra portion of safety.

Multi-talented to the max. As a versatile reversible harness, the ITUS can be used in any situation - hike & fly, local soaring, cross-country and travelling the world. To help you achieve your daily goal, it has some clever features. For example, using a zip, the rucksack can be completely detached from the harness. The result is a lightweight harness with a seat plate that is comfortable in the air as well as superlight and compact on the ground. Please note: more varieties of ITUS compatible rucksacks will soon be available for retro-fitting. This means the packing volume is flexible depending on the equipment or intended use. Simply zip on the required size… and you are ready to go! Therefore you never carry more weight that is necessary and you have exactly the storage space you need.

Everyday in perfect form. The carry comfort of the ITUS was extensively tested and cleverly optimised: the SAS-TEC protector of the harness simultaneously serves as the back section of the rucksack. When using the ITUS as a rucksack, the characteristic of the protector to distribute the pressure over a wide area has the same effect as the carrying system of a trekking backpack. Even with a fully stuffed rucksack, the load will not push uncomfortably into the back. There is also a ergonomically shaped, padded hip belt which helps to relieve the strain on the shoulders when carrying. Drinking bladder, hiking poles, jacket and other small items are always at hand in the convenient pockets. Once in the air it remains comfortable - with a robust honeycomb seat board, breathable padding on the back and sufficient storage space within reach for instruments, gloves, muesli bars, etc.

Designed in every detail. One of the main features of the ITUS is safety. The materials and handling of the harness were extensively tested during daily use, on the G-Force Trainer and in a test environment. The results are impressive - even while the harness is being unpacked, the airbag fills itself… not just when in flight. This is achieved with a 3-chamber system supported by Nitinol wire and a polycarbonate plate. Both memory materials persistently return to their original form, but remain flexible when packing. This facilitates the small packing size of the ITUS and already protects the pilot during take off. The colour-coded buckles of the Clicksafe system make correct connection easy. The additional SAS-TEC protector distributes the pressure of hard objects, such as stones on a slope or a bottle in the storage compartment, over a larger area in the event of a fall onto the back. This reduces the risk of severe back injuries.

Directional parachute compartment. During the design phase, particular attention was focused on the deployment of the parachute. For good reason - an unimpeded rescue deployment is essential for pilot safety. To ensure easy operation even under difficult conditions, our test pilots and developers did countless laps with the ITUS in the G-Force Trainer. At the highest g-load, the deployment of the rescue was tested under consideration of all possible deployment directions. As a consequence, the inner container was adapted. Due to the new design, the pulling force is distributed over the entire front of the rescue. This makes it easier to deploy and prevents the rescue from getting stuck in the compartment - regardless from which angle you pull it.

Technical data

  SML
Pilot height cm <165 165-180 >180
Reversible harness weight* kg 3,4 3,7 3,9
Harness weight** kg 2,4 2,7 2,9
Weight hiking rucksack g 690 690 730
Weight cover g 45 45 45
Weight SAS-TEC protector g 280 280 280
Volume hiking rucksack l 77 77 87
Certification (EN/LTF)   PH 288.2019 (EN & LTF)
Maximum clip-in weight   120 kg (EN & LTF)
Energy absorption value g 28 28 28

Short and compact

Fits both little and large. The ITUS is available in sizes S, M and L. Soon further rucksacks for different packing volumes will be available for all sizes.

SAS-TEC & airbag protector. The SAS-TEC protector made from viscoelastic soft foam was first used in motorcycling and skiing. It is very light and guarantees excellent support and pressure distribution in the back area. When reversing the ITUS, this doubles as the comfortable back support of the rucksack. Within 30 seconds of unpacking it, the airbag is already inflated.

Clicksafe closing system. Our Clicksafe system with colour-coded buckles means with one glance you can be certain that you have hooked in correctly. The main hang points and buckles are green on the right side and red on the left side.

Optimised parachute container. The rescue compartment was designed using 3D design software and tested in practice for all deployment directions. The harness and the inner container of the rescue are optimised for easy deployment - the rescue being wedged in the compartment has been prevented.

Robust material. A particularly tear-resistant ripstop fabric is used on the airbag, supplemented by Nitinol wire and a polycarbonate panel (both memory materials) which always return to their original shape. The built-in zips, straps, carabiners and the honeycomb seat board have also already proven themselves in practice. When selecting all materials, attention was paid not only to safety and durability, but also to low weight.

Produsent: Nova
Størrelse:
Pris: NOK 9 400,00
plus frakt
Vekt: 3 Kg
Mengde:
Copyright MAXXmarketing GmbH
JoomShopping Download & Support

Sende oss pakker?

Termikk&Rotor A/S
P.B. 1031 sentrum
0104 Oslo

Åpningstider butikk

Mandag-onsdag: 10-17
Alltid tilstede på mail!! 
... og nettbutikken er alltid åpen!